How to take apart the Panasonic Toughbook CF-W2

From the archives. Good thing for the Wayback Machine.

1. 1 screw inside the CD/RW unit underneath the cover on left. Do this before you power down the unit. Otherwise you will have to force open the drive from the bottom.
2. 2 nut screws on the VGA connector on the top left side.
3. Take the plastic cover off the Wireless antenna near the Intel logo on the right side of the unit by prying the cover loose. Remove 2 screws at side of antenna.
4. Turn the notebook over.
5. 7 screws at back. Make a note of the screw positions in a piece of paper, since there are 3 long and 4 short screws.
6. 1 screw for the Memory Cover
7. 3 long screws holding the Honeycomb cover, next to the memory slot. These screws hold the keyboard.
8. 1 inside after the Honeycomb cover is removed.
9. Turn the unit over. Open the lid. Push The keyboard up from back under the battery. The top part comes up. Now lift up the keyboard. Pull the ribbon out underneath the TOUGHBOOK Sign. Unclip the ribbon from the unit very carefully.
10. 2 silver screws on inside just above the logo Intel Centrino under the keyboard
11. 6 black screws under the keyboard
12. Now close the lid and turn the unit over.
13. 4 screws holding the LCD Hinges at back (2 Screws each side).
14. Now slowly pull the back cover up.

Advertisements

One thought on “How to take apart the Panasonic Toughbook CF-W2

  1. Unrelated to this post .. Just wanted to say a huge thanks for your ns2-LEACH blog. It helped me a huge lot. I installed LEACH on ns2.35.
    Had sent you a mail thanking you too.

    Regards,
    Deepa.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s